CTR , 9.9 out of 10 based on 573854 ratings

Technical Data


2240/41 – 4240/41

Raised Panel Pan Door

  • Door sections are formed from heavy, 24-gauge galvanized draw quality steel
  • Section joints are roll-formed into a tongue-and-groove design which produces a superior weather seal
  • Bottom weather seal utilizes an aluminum retainer and extruded virgin vinyl
  • Long-lasting rollers assure consistent, quiet and efficient operation
  • Inside stiles are made of galvanized steel and stile holes are “dimpled” for increased holding power
  • Extension or torsion springs are individually computer-calibrated to lift your door
  • Extra-heavy paint system consists of .25 mil. primer with rust inhibitor and a .75 mil. coating of baked-on polyester paint in your choice of white, almond, sandstone, brown or evergreen
  • Hinges are stamped from galvanized steel in a “wide body” pattern for greater stability and longer life
  • Optional latching lock system opens easily from inside or outside
  • Models 2241/4241 include 1-3/8″ CFC free polystyrene insulation with a vinyl back cover
  • Models 2241/4241 DASMA TDS-163 calculated R-value* – 6.62


These models utilize 24-gauge exterior steel skin with 1-3/8″ thick CFC free polystyrene foam insulation with a vinyl back cover. Steel end and intermediate stiles are held firmly in place by a tab-loc system, creating increased strength and rigidity.

2241/4241R-value* – 6.62

*Calculated door section R-value is in accordance with DASMA TDS-163.